Spindle Penning Systems

Spindle Panels - Quick Latch System OR Spindle Panels - Pin In System (41" Series Panels)

Spindle Panels - Quick Latch System

1. Order panels
• Order panel length required

2. Order quick latch packages

• one for each fixed panel end where swinging panels meet
• galvanized latches must be used for the 41” series of panels

3. Order flipper latches

• one for each swinging panel at a wall
• order anchor bolts for flipper latches – 4 per latch

4. Order swing hook packages

• one package of 4 hooks for each swinging panel
• N.B. There are 5 packages of 4 in the spindle package of swing hooks. The hooks for plastic panels come as a single package of 4.

5. Order leg packages

• as required at ends of panels and joints of fixed panels

6. Order panel spacers

• one required at each fixed panel joint

7. Order anchors

• anchor bolts or T-bolts for legs
• as required for fixed panels and wall brackets on walls

OPTIONAL PARTS:

1. Galvanized Channel post + plate & gussets (2013310) – can be used at panel joints when extra strength is required
2. Fixed bracket (3-way/4-way) - two for each fixed panel intersection (bracket is approximately 6” wide o.d.)
3. Pin-in packages for feeders

Spindle Panels - Pin In System (41" Series Panels)

1. Order panels

• “-41” series (finisher/breeder 35” rod length, 4” o.c., 41.25” overall – from floor to top of top pipe)
• deduct 6” o.c. for swing panel with hinge straps etc.

2. Order posts and wall hinge strap

• one double swing channel post, where a stationary (or swing) panel meets 2 swinging panels
• order wall straps at each wall

3. Order panel hinge straps and pins

• one for each swinging panel at a wall
• order anchor bolts for straps – 2 per strap
• order 2 hinge straps and 2 pins per gate

OPTIONAL PARTS:

1. Pin-in packages for feeders