PLF Plastic Wall Exhaust Fans

12” to 36” Sizes.
Molded impact resistant black polyethylene housings with UV prohibitors.
Standard base mount motors are easily replaced.
Eash to remove shutter with welded steel frame, aerodynamic PVC louvers, and 1.5"x1.5" protective mesh screen are held in place by a stainless steel pin and is virtually indestructible.
Powder coated exhaust guard.
Corrosion proof airfoil polypropylene blades on 12” to 24” sizes.
36” fan has a galvanized blade.
Heavy duty motors are totally enclosed, ball bearing, high efficiency dual voltage, single phase, 60 Hz (PLF36-H is 230 volt only).
Also available with EC motor

						TYPICAL MAXIMUM CFM AT STATIC PRESSURE (in wg.)
MODEL	SIZE	MOTOR				0" SP				1/10" SP				1/4" SP				ROUGH OPENING
MODEL	SIZE	speed	volts	hp	RPM	CFM	FEP (kW)	FEI	CFM/W	CFM	FEP (kW)	FEI	CFM/W	CFM	FEP (kW)	FEI	CFM/W	ROUGH OPENING
PLF12-EVDL Test #: 24191	12"	variable	115/230V	1/4	1625	870	0.16	1.05	5.6	320	0.12	0.74	2.0	110	0.11	0.62	0.6	15 in²
PLF16-EVDL Test #: 24187	16"	variable	115/230V	1/4	1625	2330	0.31	1.16	8.6	1760	0.31	1.25	7.2	740	0.22	0.82	2.8	19 1/4 in²
PLF18-FVDL Test #: 24186	18"	variable	115/230V	1/3	1625	2830	0.37	1.17	8.9	2070	0.35	1.18	7.0	1140	0.29	0.91	3.6	21 1/4 in²
PLF24-M Test #: 24190	24"	variable	115/230V	1/3	1075	5240	0.59	1.37	12.2	3730	0.54	1.41	9.7	2250	0.46	1.11	5.4	27 1/4 in²
PLF24-GVDL Test #: 24188	24"	variable	115/230V	1/2	1625	5820	0.64	1.09	9.9	5030	0.69	1.20	8.7	3140	0.60	1.11	5.9	27 1/4 in²
PLF36-MP1 Test #: 24192	36"	single	115/230V	1/2	855	9110	0.94	2.13	20.7	7420	0.97	1.90	14.6	4390	0.78	1.19	6.7	40 1/4 in²
PLF36-H Test #: 24189	36"	single	230V	1	790	12760	1.27	1.57	15.8	11110	1.38	1.62	13.0	7760	1.28	1.36	8.3	40 1/4 in²
Certified performance by BESS Labs, University of Illinois. Test results completed at 230V without accessories.

Low air restriction 12” to 24” weather hoods. Most hoods restrict 20 to 35% of air flow, our design restricts less than 10%.
Insulated 16” to 36” winter inserts. R8 insulation value and unique double seal protect against heat loss.
Performance enhancing cones in durable black polyethylene are available for 24” and 36” fans.